Heat water dockside with 120V AC power or when underway, using engine heat. These water heaters feature an ignition-protected design, cladded aluminum tanks, and dual-wall heat exchangers. To facilitate installation, heat exchanger ports are offered with a choice of two configurations—either located on the same side where the cold in/hot out ports are located, or on the opposite or "rear" side of the unit. For the outer case, choose between stainless steel, galvanized steel, or epoxy-coated aluminum. To protect against galvanic corrosion and extend tank life, use of a magnesium anode is highly recommended.
|Amperage||12.5 Amps at 120 Volts|
|Dimensions||16" Width x 16" Height x 22" Depth|
|ISO Approved||UL Approved|
|Material||Marine Galvanized Steel|
|Port Size||Cold/Hot In/Out: 3/4" NPT
Engine Coolant In/Out: 3/4" (for Heater Hose); 1/2" Drain
|Warranty Details||Two Year Limited|