The “MAXSET” galvanised and stainless steel (AISI 316) anchor range, based on the proven ‘Plough’ design is available in four different sizes to suit boats from approximately 4 m (15’) to 17 m (55’).
The use of a swivel and joining shackle to join your anchor and rode will greatly improve anchor retrieval and help ensure that the rode lays neatly into your anchor locker. Thus, they are highly recommended for use with Maxwell’s automatic rope/chain series windlasses. Two sizes (6 mm - 8 mm/1/4” – 5/16” and 10 mm - 13 mm/3/8” – 1/2”) are available to suit vessels up to 20 metres (65 feet). These robust single swivel anchor connectors, with captured pins, will not loosen under load and pull smoothly and easily over bow rollers. Note: Joining the swivel directly to the anchor is not recommended.