Seaward Marine 11 Gal. Water Heater, Galvanized Steel Case w/Front-Mounted Heat Exchanger, 120V AC
Heat water dockside with 120V AC power or when underway, using engine heat. These water heaters feature an ignition-protected design, cladded aluminum tanks, and dual-wall heat exchangers. To facilitate installation, heat exchanger ports are offered with a choice of two configurations—either located on the same side where the cold in/hot out ports are located, or on the opposite or "rear" side of the unit. For the outer case, choose between stainless steel, galvanized steel, or epoxy-coated aluminum. To protect against galvanic corrosion and extend tank life, use of a magnesium anode is highly recommended.
| Amperage | 12.5 Amps at 120 Volts |
| Capacity | 11 Gallons |
| Dimensions | 16" Width x 16" Height x 22" Depth |
| ISO Approved | UL Approved |
| Material | Marine Galvanized Steel |
| Port Size | Cold/Hot In/Out: 3/4" NPT Engine Coolant In/Out: 3/4" (for Heater Hose); 1/2" Drain |
| Voltage | 120 Volts |
| Warranty Details | Two Year Limited |