Shop Our Rigging Hardware

Marine Rigging Hardware for Standing and Running Systems

Sailing rigs and deck support systems transfer high load forces across spars, wire ropes, and hull mounting points. Selecting correct rigging hardware keeps stays, lifelines, and control lines set to proper working tension under real sea conditions. Having access to high-grade rigging supplies allows boat owners, riggers, and sailors to repair worn terminal points, re-wire lifelines, and maintain overall mast stability.

Verifying wire gauge, thread pitch, pin diameter, and rated working loads prevents component failure when setting up or tuning marine rigging hardware.

Key Hardware Categories for Marine Rigs

Rigging builds and mast tuning require specific terminal ends, tension adjusters, and deck fasteners matched to wire size and load requirements.

Swage Studs, Terminals, and Sleeves

Terminating 1x19 stainless wire rope or vinyl-coated lifeline cable requires precise cold-compression fittings. Machine swage studs, hand-crimp terminals, swage balls, and copper Nicopress sleeves secure wire loops and thread ends while preserving rated wire breaking strength.

Turnbuckles and Locking Hardware

Fine tension adjustments on shrouds and stays require turnbuckles with matched thread pitches. Open-body and tubular turnbuckles use opposing left-hand and right-hand threads to draw wire ends together. Installing matching lock nuts keeps settings fixed against engine vibration and mast motion.

Clevis Pins, Ring Pins, and Deck Attachments

Pin connections secure turnbuckles and wire terminals to chainplates and deck fittings. Clevis pins held by circular ring pins or cotter split pins provide quick-release points for seasonal rigging teardowns, using high-tensile stainless rigging hardware to resist bending and galling under load.

Technical Considerations for Rigging Fittings

Selecting rigging fittings requires matching material composition and sizing to the physical demands of your boat.

• 316 Stainless Steel Grade: Resists saltwater pitting and crevice corrosion far better than standard industrial alloys, making it standard for stays, turnbuckles, and terminals.
• Exact Wire and Thread Sizing: Wire sizes like 1/8 inch, 3/16 inch, or 1/4 inch must match terminal inner diameters exactly to achieve full compression strength during swaging.
• Regular Inspection Routine: Inspect swage sockets annually for hairline cracks, check pins for wear, and replace tape over turnbuckle threads to prevent trapped saltwater from corroding the metal.

Visit Fawcett Boat Supplies in Annapolis for Rigging Gear

Riggers and boaters looking for reliable line and wire hardware can visit Fawcett Boat Supplies at 919 Bay Ridge Rd, Annapolis, MD 21403. Located near the Annapolis waterfront, the shop carries a deep inventory of rigging supplies, wire rope by the foot, terminal ends, and stainless rigging hardware from makers like Johnson Marine, C.S. Johnson, and Loos & Co. Stop by to check terminal measurements, pick up replacement pins, or talk through your setup with the store team.